BQVGY - SAFETY-COOL 130 (FORMERLY 130 WAX COOL)
- MSDS: BQVGY
- Manufacturer: CHEM TREND INC
- Product Name: SAFETY-COOL 130 (FORMERLY 130 WAX COOL)
- National Stock Number: 9150-00N037896
Product Identification
Product ID:SAFETY-COOL 130 (FORMERLY 130 WAX COOL)
MSDS Date:07/01/1987
FSC:9150
NIIN:00N037896
MSDS Number: BQVGY
Responsible Party
HOWELL, MI 48844-0860
US
Emergency Phone: 517-546-4520
Info Phone: 517-546-4520
Cage: 2W738
Contractor
Telephone: 800-727-7730
Cage: 2W738
Ingredients
HYDROCARBON WAX, (ALKANOLAMINES AND EMULSIFIERS)
Fraction By Weight: 20-30%
PETROLEUM OIL
Fraction By Weight: 5-15%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: BALANCE
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN/EYE:MAY CAUSE IRRITATION
BUT IS NOT CORROSIVE. INHAL:MAY CAUSE RESPIRATORY IRRITATION.
INGEST:NO ADVERSE EFFECTS EXPECTED. DO NOT INGEST. CHRONIC:A REVIEW
OF LITERATURE DOES NOT SHOW OBVIOU S LONG-TERM HAZARDS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH WITH SOAP & WATER. LAUNDER CONTAMINATED CLOTHING
BEFORE REUSE. EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
INHAL:MOVE TO FRESH AIR. INGEST:CALL MD.
Fire Fighting
Flash Point:NONE
Extinguishing Media:FIRE AND HEAT MAY DRIVE OFF WATER LEAVING CHEMICAL
INGREDIENTS WHICH MAY BURN. USE FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SMALL SPILLS:SOAK UP WITH ABSORBENT MATERIAL.
LARGE SPILLS:DIKE AREA TO PREVENT RUNOFF, RECOVER LIQUID, SOAK UP
REMAINING LIQUID WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP DRUMS AND CONTAINERS OR PRODUCT
CLOSED WHEN NOT IN USE. DO NOT ADD ANY OTHER ADDITIVE INGREDIENTS
TO PRODUCT.
Other Precautions:NONE KNOWN.
Exposure Controls
Respiratory Protection:RESPS MAY BE USED WHEN ENGINEERING & WORK
PRACTICE CNTRLS ARE NOT TECHNICALLY FEASIBLE, WHEN SUCH CONTROLS
ARE IN PROCESS OF BEING INSTALLED, OR WHEN THEY FAIL & NEED TO BE
SUPPLEMENTED. IF USE OF RES P NEC USE ONLY NIOSH/MSHA
APPRVD(SUPDAT)
Ventilation:GOOD INDUSTRIAL HYGIENE PRACTICES REC THAT ENGINEERING
CONTROLS (SUCH AS LOCAL &/OR MECHANICAL VENTILATION) BE USE.
Protective Gloves:OIL IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES.
Other Protective Equipment:APPROPRIATE CLOTHING TO AVOID SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:60-75 (WT). PH:CONCENTRATE:10-10.2. 5% DILUTION:9-9.5. RESP
PROT:AIR SUPPLIED RESPIRATOR OR AN AIR-PURIFYING RESPIRATOR.
Chemical Properties
Boiling Pt:B.P. Text:AS WATER
Vapor Pres:AS WATER
Vapor Density:AS WATER
Spec Gravity:1
pH:SUPDAT
Evaporation Rate & Reference:1 (WATER=1)
Solubility in Water:MISCIBLE
Appearance and Odor:LIGHT TAN PASTE; BLAND ODOR
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
AVOID MATERIALS INCOMPATIBLE WITH WATER.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:HYDROCARBON DECOMPOSITION PRODUCTS AS
ELEVATED TEMPERATURES.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.